Veneer softener

Whether or not to import: no

Model: MZB-PT

Appearance: colorless transparent liquid

PH: 7-7.5

Effective substance content: 30 (%)

CAS: 156-16-15

Use range: MZB-PT 0.15-2.0mm thick veneer softener to adapt to a variety of technical and natural veneer veneer furniture veneer, furniture, industry

Features: MZB-PT 0.15-2.0mm thick veneer softener to adapt to a variety of technical and natural veneer veneer furniture veneer, furniture, industry

Product Name: veneer softener

Whether or not a hazardous chemical: no

Smell: no

Shelf life: 24 months

Packing: 25 kg / acid alkali plastic bucket

      Veneer softener
Can be used for a variety of 0.15-2.0mm thick hard and brittle easily broken veneer softening leveling modification MZB-PT type veneer softener, the treated veneer has good bending resistance and does not change the original wood texture and color. Widely used in science and technology and natural veneer veneer furniture veneer, furniture edge, softening treatment process products bending leveling.
First, the physical and chemical properties of products:
1, appearance: colorless transparent liquid
2, pH value: 7 ~ 7.5
3, specific gravity: 1.2
4, smell: no smell
5, more than 30% active ingredients:
6, solubility: soluble water
7, thermal decomposition temperature: 250
8, chemical composition: oxygen base modification
Two, the scope of application:
Adapt MZB-PT type veneer softener in the furniture veneer to the natural veneer and veneer science and technology all 0.15-2.0mm thick, furniture edge banding, technology products, softening bend leveling processing.
Three, the use of methods:
General use of soaking method and spraying method
1, soak the proposal directly to MJB-PT type veneer softening Ji and the concentration of water diluted into 20% aqueous solution after soaking. Soaking time is 5-30 minutes.
2, brushing method is recommended to use the concentration of 25%-30% coating area of 20-30 square / KG
3, spray, please move to the outdoor ventilation operation, the use of concentration of 25%-30% spray area of 25-35 square / KG
Four, matters needing attention:
1, MZB-PT type veneer softening Ji diluted with water can be reused, do not pay attention after use so as to avoid a waste of.
2, make sure that the natural veneer softens dry or hot press drying to moisture content below 15% during the subsequent processing
3, below 1.0 mm thickness of veneer in the treatment by the immersion method suggested the veneer ends of the edge protection, to prevent water damage.
4, 1.2-2.0 mm thickness of veneer in the brushing method and spraying method for processing suggestions will be both positive and negative sides are processed, in order to facilitate the veneer full access to medicine
5, when the use of sprayer spray, please move to the outdoor ventilation operation
6, in case of a large number of drinking water to drink, do not force vomiting, go to the hospital for treatment
7, the effective use of the period: 24 months