The softened medicine for the pencil plate

Whether or not to import: no

Model: MZB-JQ

Appearance: colorless transparent liquid

PH: 10-12

Effective substance content: 60 (%)

CAS: 156-16-18

Scope of use: widely adapted to the softening and coloring of the pencil plate

Special service: OEM, ODM production and development can be carried out according to the sample

Product Name: Pencil plate softening medicinal water

Whether or not a hazardous chemical: no

Smell: no

Shelf life: 24 months

Packaging:25 kg / acid alkali plastic bucket

Wood Bao - environmental protection sheet softener

MZB-JQ type sheet softener is mainly used for solid wood plate thickness of 2.0mm above 80mm thick below the softening curve, leveling, profile modification treatment, after treatment can effectively improve the plate of longitudinal compression and parallel extension force. It has good bending and tensile properties. MZB-JQ type sheet softener sheet has the advantages of simple operation, stable size is not easy to rebound after softening (inside or outside the sheets buckle), a series of advantages of using small amount of low cost. Widely adapted to the solid wood bending back, solid wood bent head, solid wood bending table legs, solid wood special-shaped crafts and other soft bending imitation modification. Is the rubber wood, oak, Manchurian ash, piles of wood, birch, oak, pine, bending form furniture preferred softening agent

1. The physical and chemical properties of the product:

1, appearance: colorless transparent liquid

2, pH: 10~12

3, proportion: 1.45

4, smell: odorless

5, more than 60% active ingredients:

6. Solubility: soluble water

7. Thermal decomposition temperature: 260 C

8, chemical composition: oxygen based modifier

Two. The scope of application:

The wood sheets adapted to all kinds of 2.0mm thick or less than 80mm thick are softened, leveled and modified.

Three. Methods of use:

The proposal directly to MZB-JQ type sheet softener and the concentration of water diluted into 3-8% aqueous solution after heating for 2-12 hours (depending on the specific immersion time sheet thickness, material hardness - see processingparameters) can be carried out after bending processing.

Four. Note:

1, MZB-JQ type sheet softener diluted with water can be reused, do not pay attention after use so as to avoid the waste.

2, plate softening, please ensure that the plate temperature is not less than 50 degrees when the bending process, suitable for (high frequency machine, steam engine) large batch operation.

3, 40mm above the 80mm thickness of solid wood sheet softening and bending treatment, it is recommended to extend the holding time for 5-8 minutes in order to ensure the stability of its size.

4. If you drink a lot of water in case of a mistaken drink, do not force vomiting and go to a hospital

5. The duration of effective use: 36 months