A special RO film scale inhibitor for high hardness and high alkalinity water quality

Whether or not to import: no

Model: ENK-102

Chemical composition: orthophosphate

Use: reverse osmosis scale inhibitor

Type: reverse osmosis membrane scale inhibitor

Appearance: amber liquid

Effective substance content: 25 (%)

Content: 25 (%)

PH value: 5-9

Reference amount: 3-8

CAS: 000000000

First, performance and use

1) for the water quality of high hardness, high basicity and high Ph value, it can effectively control calcium carbonate scale and calcium sulfate scale in reverse osmosis system.

2) to effectively control the scale of inorganic matter in a large concentration range, the maximum allowable value of LSI is 3 under the condition of without acid.

3) not coacervation of iron aluminum oxide and silicon compound to form insoluble matter;

4) it can be used in reverse osmosis CA and TFC film, nanofiltration membrane and ultrafiltration membrane.

5) excellent solubility and stability;

6) the pH value of water supply is effective in the range of 5-10.

Two. Technical indicators

Appearance: light yellow transparent liquid

PH (1%):2.0 + 1

Specific gravity (25 g/cm3):1.10 + 0.05

Shelf life: 2 years

Three. Dosage

The required dosing amount should be calculated according to the water analysis report and the system condition, and the general dosage is 2 - 4ppm.

Four. Methods of use

1) the medicament was added before the security filter;

2) calibrate the actual output of the metering pump;

3) when preparing the liquid, it should be fully stirred for 15 - 20 minutes.

4) regular cleaning plus kits, to prevent the breeding of bacteria.

5, packaging and storage

Anti osmosis scale inhibitor and dispersant ENK-102 are packed in 25kg or 20kg plastic barrels

Five. Safety protection

During operation, pay attention to labor protection, avoid contact with skin, eyes and so on, and rinse with a lot of water after contact.