8 times thickening liquid reverse osmosis inhibitor

Whether or not to import: no

Model: EN-150

Chemical composition: 00000

Use: heating water scale inhibitor

Type: reverse osmosis membrane scale inhibitor

Appearance: colorless transparent liquid

Effective substance content: 100 (%)

Content: 800 (%)

PH value range: 2.5 + 1

Reference amount: 0000

CAS: 0000

First, performance and use

Reverse osmosis membrane scale inhibitor EN-150 is a highly efficient 8 times concentration film scale inhibitor, which is suitable for reverse osmosis (RO) system and NF and UF systems

In addition, it can prevent the fouling of the film surface, and can improve the water production and water production quality, and reduce the operating cost.

1) effective control of inorganic fouling in a large concentration range, and the maximum allowable value of LSI is 2.8 without acid.

2) not condense with ferric aluminum oxide and silicon compound to form insoluble compounds

3) it is particularly effective for the control of iron, aluminum and heavy metal pollutants, and the concentration of the inlet side of the iron is allowed to reach 8.0mg/L

4) it can effectively inhibit the polymerization and deposition of silicon, and the concentration of SiO2 in the concentrated water side can reach 290 mg/L

5) can be used in reverse osmosis CA and TFC film, nanofiltration membrane and ultrafiltration membrane

6) excellent solubility and stability

7) the water supply PH is effective in the 5-10 range

Two. Technical indicators

Appearance: colorless transparent liquid

PH (1%):2.5 + 1

Specific gravity (25 g/cm3):1.45 + 0.05

Three. Dosage

The dosage of the anti osmosis scale inhibitor and dispersant EN-150 is determined according to the total analysis report of water quality and the calculation of the reverse osmosis system. General dosage is O.5-2mg/L, in the recommended range of dosage, scaling can control most of the following types: calcium carbonate, calcium sulfate, barium sulfate, strontium sulfate, ferric hydroxide, aluminum hydroxide and silicon.

Four. Methods of use

1) the medicament was added before the security filter;

2) calibrate the actual output of the metering pump;

3) when preparing the liquid, it should be fully stirred for 15 - 20 minutes.

4) regular cleaning plus kits, to prevent the breeding of bacteria

Five, packaging and shelf life

Conventional packaging 27.55kg per barrel, EN-170 physical and chemical properties stable, the shelf life of two years

Six. Safety protection

During operation, pay attention to labor protection, avoid contact with skin, eyes and so on, and rinse with a large amount of water after contact.